SUPER MICRO Computer X7SBL-LN1/LN2 - Manual (Page 61)

Chapter 4: BIOS
4-5
SATA AHCI Legacy Enable
This setting allows you to disable SATA ports 5 and 6 while in this mode. The
options are Disabled and Enabled.
IDE Channel 0 Master/Slave/SATA Port2/SATA Port3
These settings allow you to set the parameters of slots indicated above. Hit <Enter>
to activate the following sub-menu screen for detailed options of these items. Set
the correct confi gurations accordingly. The items included in the sub-menu are the
following:
Type
This option allows you to select the type of IDE hard drive. The option: Auto
allows the BIOS to automatically determine the hard drive's capacity, number of
heads, etc.). The option User allows you to enter the parameters for the HDD
installed at this connection. Enter a number between 1 to 39 to select a prede-
termined HDD type. Select CDROM if a CDROM drive is installed. Select ATAPI
if a removable disk drive is installed.