Sharp DX-B450P - Manual (Page 117)

User’s Guide 9-7
Printing is Not Clear
Troubleshooting
Printing is Not Clear
Paper Incorrectly Fed
Status Items to check Action
Transparencies are not printed clearly. Are the correct type of transparencies
used? Load the correct type of transparencies.
Are the transparencies correctly loaded
in the paper tray? Load the transparencies correctly in the
paper tray.
Postcards are not printed clearly. Are the correct type of postcards used? Load the correct type of postcards.
Are the postcards correctly loaded in
the paper tray? Load the postcards correctly in the
paper tray.
Envelopes are not printed clearly. Are the correct type of envelopes used? Load the correct type of envelopes.
Are the envelopes correctly loaded in
the paper tray? Load the envelopes correctly in the
paper tray.
Status Items to check Action
Paper cannot be fed.
Paper jams occur.
Multiple sheets of paper are fed.
Paper is fed at an angle. Is the paper correctly set? Load the paper correctly. For
transparencies, postcards or envelopes,
fan them well first to allow air to enter
between each sheet before loading.
Is the paper damp? Replace with paper from a new ream.
Is the correct type of paper used? Load the correct type of paper.
Is the paper tray pushed in? Push the paper tray completely into the
printer.
Is the paper jammed? Remove the jammed paper.
Is the printer placed on a flat location? Place the printer on a stable surface.
Are the paper tray guides set in the
correct positions? Set the length guide and width guide in
the correct positions.
Did you print any picture postcards? Clean the feed roll.