Sharp DX-B450P - Manual (Page 81)

User’s Guide 6-5
Navigating the EWS
Embedded Web Server
Network Settings Protocol Settings TAB: TCP/IP
TCP/IP: TCP/IP, DHCP, IPv6, IP
Address, Subnet Mask, Default
Gateway Settings related to the TCP/IP
protocol.
Network Settings Protocol Settings TAB: Netware
Netware: Netware, Mode, Netware
Frame
PSERVER: Print Server Name, NDS
Tree Name, NDS Context, Job Poll
Interval
NPRINTER: Print Server Name,
Remote Printer Number Settings related to Netware
setup.
Network Settings Protocol Settings TAB: EtherTalk
EtherTalk: EtherTalk, Printer Name,
Zone Name Settings related to EtherTalk
setup.
Network Settings Services Settings DNS, WINS, mDNS, SMTP, POP3,
SNMP Setup ntework services.
Trap/Email Alerts Trap/Email Alert
Conditions Re-send Interval, Offline, Consumable
Message, Toner Low/Toner Out, Paper
Low/Paper Out, Paper Jam, Cover
Open, Offset Catch Error, Mass Storage
Error, Recoverable Error, Service Call
Required, Usage Report See chapter “SNMP” on page
8-1.
Job Log Save/Delete Job Log Save Job Log
Delete Job Log See section “Job Accounting”
on page 4-19
Job Log View Job Log See section “Job Accounting”
on page 4-19
Security Settings Password Change EWS only feature. Change
EWS login Administrator
password. To reset a lost
password XXX.
Security Settings Port Control Server Port: HTTP
Client Port: SMTP/POP3 Security settings for Server
and Client ports.
Security Settings Filter Setting IP Filtering
Address Ranges/Permissions
Administrator Address See section “IP Filtering” on
page 7-3 for a description of
IP filtering.
Security Settings Operator Panel Console Security See section “Panel Lock” on
page 4-1
Security Settings Storage Devices User Flash
Erase Cycles
RAM Buffer Clear Seucrity settings for storage
devices.
Left-Navigation
Item
Top Level Left-Navigation Item
Second Level Display Area Functions Comments