Setting up your side-by-siderefrigerator, Getting ready to install the refrigerator, Setting up your side-by-side refrigerator – Samsung SRS600HNP User Manual

Page 9

Advertising
background image

setting up

_9

01
s

E

tting

u

P

25mm

25mm

at least 50mm

at least 50mm

setting up your side-by-side

refrigerator

gEtting rEaDy to instaLL tHE rEfrigErator

Congratulations on the purchase of your Samsung Side-By-Side Refrigerator. We hope you will enjoy the many
state-of-the-art features and efficiencies that this new appliance has to offer.

Selecting the best location for the refrigerator

• Select a location with easy access to the water supply.
• Select a location without direct exposure to sunlight.
• Select a location with level (or nearly level) flooring.
• Select a location with enough space for the refrigerator doors to open easily.
• Allow sufficient space to install the refrigerator on a flat surface.
- If your refrigerator is not level, the internal cooling system may not work correctly.
- Overall space required in use. Refer to drawing and dimension as below.

• Allow clearance to the right, left, back and top when installing. This will help reduce power

consumption and keep your energy bills lower.

• Do not install the refrigerator where the temperature will go below 50°F (10°C).
• Make sure you disconnect the water supply line BEFORE removing the freezer door.
See the next section on “Separating the Water Line” to avoid damage.

DA99-02028A(HM09')-EN(0.0).indd 9

2009.6.10 5:7:48 PM

Advertising