Sony BBV RX100 - Manual (Page 37)

Rx100 installation manual V1.17 29 Aug 08.doc Page 37
BBV Rx100
Interface Receiver
Addendum to manual for the following domes:
Vista PowerDome
Rx100 software RX1_V3V2
Application Notes
The RX 100 provide the following functionality when controlling the above mentioned dome
Variable speed Pan/Tilt.
Zoom/Focus, Focus/Iris Override returning to auto after Zoom In/Out.
16 Full scene presets.
2 preset patrols. (PATROL1 = RX100 patrol and PATROL 2 = dome’s TOUR 02)
Learned tour playback using AUTOPAN key.
5 minute datum/park driving to preset 1 or dome’s TOUR 2. Disabled by removing link J6/1-2
Program up to 16 privacy zones
Advanced Features
Tx400 Tx1000 Tx1500 DM DS/DS2/BX2 Mux
Display MENU ‘#’ 1 '#' WASH 1 ’#’ *889 002 or *889 10 10 2
ENTER in MENU ‘#’ 2 '#' WIPE 2 ’#’ *889 003 or *889 10 10 3
ESC in MENU ‘#’ 3 '#' AUTOPAN 3 ’#’ *889 004 or *889 10 10 4
The dome and Rx100 are linked using RS485 for control and video for the camera signal.
Rx100
Description Dome connection
J3-C1 TX-/B RS485 B -
J3-C2 TX+/A RS485 A +
Notes:
The dome address must be set at 1 for all the cameras that are controlled using a Rx100. Check with the dome manual if you
have any doubts.
The alarm output relay opens for approx 5 seconds upon power up and following any active alarm input.
If the learned tour playback is running, start patrol 1 is inhibited. The dome will be driven to a preset following an alarm
activation. 60 seconds after alarm, the learned tour will restart. A manual goto preset and lens control will stop the tour
leaving the AUTOPAN led on until the next manual pan command.
J6 Links
J6/1-2 fitted to enable the 5 minute datum mode. After 5 minutes of inactivity the dome will be driven to either preset 1 or the
dome’s TOUR 2 is started depending upon link J6/3,4,5. J6/4-5 fitted = goto preset 1, J6/3-4 fitted = start dome TOUR 2.
The dome’s TOUR 2 must be programmed from within the domes menu. Please refer to the dome manual for details.