Scientific Atlanta EXPLORER 2000 - Manual (Page 20)

Bypass Module
(Outside View)
T6431
CABLE
INPUT FROM
VCR
TO
TV
MODEL E2051-X01
RISK OF ELECTRICAL SHOCK
DO NOT OPEN CAUTION CABLE
OUT
CABLE IN
BYPASS
Bypass Module
(Inside View)
1
2
3
1 3 EXPLORER 2000 User’s Guide 565069 Rev B
Optional Features, Continued
How to Install the Bypass Module
The EXPLORER 2000 provides a bypass feature that allows you to view an
analog channel while recording a digital (or analog) channel on your VCR.
1. Bend the metal tab to the
Bypass connection toward you,
then pull the tab off to prevent it
from falling into the EXPLORER
2000.
2. Hold the Bypass module
with the connector
labels facing right
side up and
toward you.
Insert the
multi-cable
connector
on the
Bypass
module into
the Bypass connection on the EXPLORER 2000.
3. Insert the Cable In connector on the Bypass module into the Cable In
connection on the EXPLORER 2000 unit. The multi-cable connector folds
into the inside of the Bypass module.
4. Align the mounting tabs on
the Bypass module with
the screw holes on the
EXPLORER 2000 back
panel, then finger tighten the
screws (supplied with the
Bypass module) to hold the
module in place against the
back panel.
5. Connect your TV and VCR
to the Bypass module as
shown.
RISK OF ELECTRICAL SHOCK
DO NOT OPEN CAUTION CABLE
OUT
CABLE IN
BYPASS
VCR
T6432
IN TO
VCR
OUT TO
TV
TV
OUT TO
TV
Cable Input
From Wall
5
CABLE
INPUT FROM
VCR
TO
TV
MODEL E2051-X01
4