Scientific Atlanta EXPLORER 2000 - Manual (Page 40)

A-8 EXPLORER 2000 User’s Guide 565069 Rev B
How to Program the Remote Control, Continued
To Identify Programmed Codes
If you need to know what code you programmed your TV or VCR, the
remote control indicates each number in the code based on the number of
LED blinks.
1. Point the remote control away from the EXPLORER 2000, the TV,
and the VCR.
2. Do one of the following:
• To identify the TV code, press and hold and at the same
time until the LED on the remote control blinks twice
or,
• To identify the VCR code, press and hold and at the same
time until the LED on the remote control blinks twice.
3. Using the remote control keypad enter 990. The LED on the remote
blinks twice.
4. Press 1 on the keypad, then count the LED blinks. The number of blinks
indicates the first number in the code. For example, 4 blinks indicates the
first number in the code is 4.
5. Press 2 on the keypad, then count the LED blinks. The number of blinks
indicates the second number in the code.
6. Press 3 on the keypad, then count the LED blinks. The number of blinks
indicates the third number in the code.
7. Write down the code for future reference.
Continued on next page
TV Code: VCR Code: