Siemens A36 - Manual (Page 21)

20
02.03.2001 B35_02_main.f A36 mv englisch A31008-H4300-A101-3-7619
 Cell Broadcast
Some service providers offer informa-
tion services for local areas (Cell Broad-
cast, CB), e.g. display of the local area
code. Service availability depends on
the network where you are registered.
If "Cell Broadcast" is activated, you will
receive cell broadcast messages. For
more information on this, contact your
service provider.
 Setup
 On/Off
[Menu] „ Messages „ $$Setup „
$$Messages
[Change] Press.
Cell Broadcast is switched
on/off.
Note that operating times are reduced
if Cell Broadcast is activated.
Setting the CB Channel
The numbers for the available CB chan-
nels can be obtained from your service
provider. You can only set one CB
channel.
[Menu] „ Messages „ $$Setup „
<Channel ID>
[Change] Press.
The last active channel
number is displayed if
available.
?/F Where necessary, delete
the old channel number and
enter the new CB channel.
[OK] Confirm entry.
Reading Cell Broadcast
Messages
In standby mode, a new  message is
indicated by an icon in the last display
line:
Reading New Broadcasts
* Press to read the message
or scroll through it.
Rereading Broadcasts
[Menu] „ Messages „ $$Message List
* Press to read messages.
Scroll to read broadcasts (arranged in
chronological order). If the message
memory is full, the oldest messages
are overwritten.
U J
<Network Provider>
 [Menu]