Silvercrest SRD 250 A1 - Manual (Page 16)

14 SRD 250 A1
GB
IE
Handling and operation
Switching the alarm function on
Press briefl y the AL1 button ♦ 16 and/or AL2 button 15 . In the dis-
play 2 a point appears to the left and/or to the right. The alarm
function is now activated.
Switching the alarm off
Whilst the alarm is sounding press the POWER/BAND button ♦ 9 ,
to switch the alarm off for 24 hours.
Switching the alarm function off
Press briefl y the AL1 button ♦ 16 and/or AL2 button 15 . The alarm
indicators go out in the display 2 .
Snooze function (“SNOOZE” function)
Whilst the alarm is sounding press the SNOOZE button ♦ to tempo-
rarily switch off the alarm. After 6 minutes the alarm sounds again.
NOTICE
If the snooze function is activated the corresponding alarm ►
point blinks in the display 2 .
Automatic Switch-off (“SLEEP” function)
With the “Sleep” function the device switches itself off after a time
lapse of between 60 and 10 minutes.
Press the POWER/BAND button ♦ 9 to switch the device on.
Press the SLEEP button ♦ 14 . In the display 2 appears the switch off
time 60 minutes and the SLEEP-LED 6 lights up. Repeated press-
ing of the SLEEP button 14 shortens the switch off time by
10 minutes respectively.