Silvercrest SRD 250 A1 - Manual (Page 17)

15 SRD 250 A1
GB
IE
Cleaning
Press repeatedly the SLEEP button ♦ 14 until the desired
switch of time is shown in the display 2 .
To switch off the sleep function press repeatedly the SLEEP button ♦ 14 ,
until in the display 2 is shown. The SLEEP-LED 6 goes out.
Setting the display illumination
Set the DIMMER switch ♦ 19 to HIGH if you want the indicators in
the display 2 to appear brighter.
Set the DIMMER switch ♦ 19 to LOW if you want the indicators in
the display 2 to appear darker.
Cleaning
DANGER
Risk of fatal electrocution!
Remove the plug from the mains power socket before cleaning. ►
Whilst cleaning make sure that no moisture is allowed to enter ►
the device.
Do not use aggressive cleaning agents or scouring powder.
►
These can aff ect the surfaces of the device.
Clean the surfaces of the device with a soft, dry cloth. ■