Sony VIDEO Plus SLV-SE30UX - Manual (Page 8)

Getting Started 8
Code number
01* 1 , 02
68
52
10*
1 , 11* 1
24
33
45
09, 70
66
15, 16, 69*
3
Step 2 : Setting up the remote commander (continued)
Code numbers of controllable TVs
If more than one code number is listed, try entering them one at a time until
you find the one that works with your TV.
To make wide mode settings, see the footnotes below this table for the
applicable code numbers.
Code number
17* 1 , 49
06* 1 , 07* 1 , 08* 1
12, 13
22, 23
25
29
36
43*
2
38
* 1 Press WIDE to switch the wide picture mode on or off.
* 2 Press WIDE, then press Á +/– to select the wide picture mode you want.
* 3 Press WIDE. The menu appears on the TV screen. Then, press >/./?// to
select the wide picture you want and press OK.
Notes
• If the TV uses a different remote control system from the one programmed to work
with the VCR, you cannot control your TV with the remote commander.
• If you enter a new code number, the code number previously entered will be erased.
• When you replace the batteries of the remote commander, the code number may
change. Set the appropriate code number every time you replace the batteries.
Manufacturer
Sony
Akai
Ferguson
Grundig
Hitachi
JVC
Loewe
Mivar
NEC
Nokia
Manufacturer
Panasonic
Philips
Saba
Samsung
Sanyo
Sharp
Telefunken
Thomson
Toshiba