Sony STR-LV500 - Manual (Page 24)

masterpage:Left
filename[\\Nas-data-server\SONY Current jobs\SONY STR-
LV500\_DTP\4248914121\424891412STRLV500CEL\GB060TH_STR-LV500-CEL.fm]
24 GB
model name1[STR-LV500]
[4-248-914-12(1)]
To reset all the input buttons to
their factory setting
Press ?/1, AV ?/1 and VOLUME – at the
same time.
You can use the SET UP menu to set the size and
distance of the speakers connected to this
system.
1
Press ?/1 to turn on the system.
2
Press MAIN MENU repeatedly to select
the SET UP menu.
3
Press V/v to select the menu item you
want.
For more information, see “Speaker setup
parameters”.
4
Press B/b to select the parameter.
5
Repeat steps 3 and 4 until you have set
all of the items that follow.
Speaker setup parameters
The initial settings are underlined.
x (SUB WOOFER) (Sub woofer)
• YES
If you connect a sub woofer, select “YES”.
• NO
If you did not connect a sub woofer, select “NO”.
This activates the bass redirection circuitry and
outputs the LFE signals from other speakers.
x (FRONT) (Front speakers)
• LARGE
If you connect large speakers that will effectively
reproduce bass frequencies, select “LARGE”.
Normally, select “LARGE”.
• SMALL
If the sound is distorted, or you feel a lack of
surround effects when using multi channel surround
sound, select “SMALL” to activate the bass
redirection circuitry and output the front channel
bass frequencies from the sub woofer. When the
front speakers are set to “SMALL”, the center, and
surround speakers are also automatically set to
“SMALL” (unless previously set to “NO”).
x (CENTER) (Center speaker)
• LARGE
If you connect a large speaker that will effectively
reproduce bass frequencies, select “LARGE”.
Normally, select “LARGE”. However, if the front
speakers are set to “SMALL”, you cannot set the
center speaker to “LARGE”.
Setting up the speakers
SW
L R
C