Sony STR-LV500 - Manual (Page 4)

masterpage:Left
filename[\\Nas-data-server\SONY Current jobs\SONY STR-
LV500\_DTP\4248914121\424891412STRLV500CEL\GB03CON_STR-LV500-CEL.fm]
4 GB
model name1[STR-LV500]
[4-248-914-12(1)]
Before you get started
The hookup diagrams on the subsequent pages assume the use of the following optional connection
cords (A to E) (not supplied).
A Audio/video cord
Yellow (video)
White (L/audio)
Red (R/audio)
B Audio cord
White (L)
Red (R)
C Video cord
Yellow
D Optical digital cord
E Coaxial digital cord
Notes
• Turn off the power to all components before making any connections.
• Be sure to make connections firmly to avoid hum and noise.
• When connecting an audio/video cord, be sure to match the color-coded pins to the appropriate jacks on the
components: yellow (video) to yellow; white (left, audio) to white; and red (right, audio) to red.
• When connecting optical digital cords, insert the cord plugs straight in until they click into place.
• Do not bend or tie optical digital cords.
Inserting batteries into the remote
Insert two R6 (size AA) batteries with the + and – properly oriented in the battery compartment.
Tip
Under normal conditions, the batteries should last for about 6 months. When the remote no longer operates the
control center, replace both batteries with new ones.
Notes
• Do not leave the remote in an extremely hot or humid place.
• Do not use a new battery with an old one.
• Do not expose the remote sensor of the control center to direct sunlight or lighting apparatuses. Doing so may cause
a malfunction.
• If you don’t use the remote for an extended period of time, remove the batteries to avoid possible damage from
battery leakage and corrosion.
• Turn off the power to all components before making any connections.
• Be sure to make connections firmly to avoid hum and noise.
Hooking up the components
Required cords