SUPER MICRO Computer AS1011M-T2 - Manual (Page 56)

5-22
AS1011M-T2 User's Manual
5-11 Onboard Indicators
LAN1/LAN2 LEDs
The Ethernet ports (located beside
the VGA port) have two LEDs. On
each Gb LAN port, one LED blinks to
indicate activity while the other may
be green, amber or off to indicate
the speed of the connection. See
the table on the right for the func-
tions associated with the connection
speed LED.
LAN LED
(Connection Speed Indicator)
LED Color Defi nition
Off 10 MHz
Green 100 MHz
Amber 1 GHz
Onboard Power LED
When illuminated, the DP4 LED indi-
cates that power from the power supply
is being supplied to the motherboard.
DP4 should normally be illuminated
when the system is connected to AC
power, whether turned on or not. DP4
will fl ash on and off when the system is
in an S1, S3 (Suspend to RAM) or S4
(Suspend to Disk) state.See the table
on the right for DP4 LED states.
+3.3V Standby LED
(DP4)
State System Status
On Standby power present on
motherboard
Off No power connected
Flashing System in standby state