Sony KD-32DX150U - Manual (Page 11)

Basic operation
9
Overview of the remote control buttons
Mute button
Press to mute the sound. Press again to
restore.
VIDEO button
Press to switch off your VCR or DVD
temporarily. Press again to resume normal
operation.
/
TV button
Press to switch off your TV temporarily. The red
indicator on the front of the TV illuminates.
Press again to resume normal operation.
/
DIGITAL/ button
Press to switch between digital and analogue
mode.
Screen format button
Press repeatedly to change the screen format.
Input button /Hold button
Press to select signals from equipment
connected to the TV sockets (refer to
‘Connecting other equipment to the TV’).
In text mode press to keep a page on display.
Press again to cancel.
Buttons 0 - 9
When the Media Selector is set ot TV or VCR,
press to input the required channel number.
For numbers 10 and above, enter the second
digit within 2 seconds.
Previous channel button
While watching analogue TV pressing this
button will return you to the previous channel
you were watching.
While watching digital TV pressing this button
can also act as an ‘EXIT’ key and cancel any
digital text application that may be running.
Media Selector button
This remote operates not only Sony DVDs and
VCRs, but also those made by other
manufacturers. Press this button repeatedly to
select the type of equipment you want to
control. A green light appears momentarily to
indicate the mode selected.
Note:
Before operating your VCR or DVD, you must enter
the correct configuration code. Please refer to the
section ‘Remote control operation for VCR and DVD
players’.
Text button
Press to enter the text mode.
EPG button
Press to display the Electronic Programme
Guide when in digital mode.
Coloured buttons
These buttons are used for the text and digital
menus. Refer to the relevant sections in this
instruction manual.
Volume + and - button
Press to adjust the volume to the desired level.
REC button
When the Media Select switch is set to VCR,
press this button to begin recording.
MENU button
Press to enter the menu system of this TV.
Control pad
Use these buttons to navigate through the
menu system of the TV.
Note:
When the Media Selector button has been set to
VCR or DVD, the control pad operates the main
functions of your VCR or DVD.
OK
VIDEO / TV
DIGITAL
/
2 3
4 5 6
7 8 9
0
1
MENU REC
VCR DVD
TV
PROG
PROG +/- button
In TV mode: Press to select the next or
previous programme.
In Teletext mode: Press to select the next or
previous page
.
OK button
In analogue mode press to display a list of
channels on screen. Press the
V or v button to
scroll through the list until the channel you wish
to view is highlighted, then press the OK button
to display that channel on screen.
In digital mode press to display the Channel
Index menu.
Info button / Reveal button
In TV Mode: Press to display the INFO menu
in digital mode. When watching analogue
programmes press to reveal information such
as programme number etc.
In Teletext mode: Press to reveal concealed
information (e.g. answers to a quiz). Press
again to cancel
.
9-13.fm Page 9 Monday, February 10, 2003 4:05 PM