SUPER MICRO Computer SUPERSERVER 6012P-6 - Manual (Page 47)

Chapter 5: Advanced Motherboard Setup
5-11
P4DPR-6GM+ Quick Reference
Jumper Description Default Setting
JBT1 CMOS Clear Pins 1-2 (Normal)
JD1 Speaker Enable (Pins 6-7) Closed (Enabled)
JPA1/JPA2 SCSI Channel A/B Termination Open (Terminated)
JP3/JD4 LAN1/LAN2 Enable/Disable Pins 1-2 (Enabled)
JP4 VGA Enable/Disable Pins 1-2 (Enabled)
JP10-JP15 PCI-X Bus Speed Setting See Section 5-9
JP22 SCSI Enable/Disable Pins 1-2 (Enabled)
JP37/WD Watchdog Enable/Disable Open (Disabled)
JP38 Thermal Fan Enable/Disable Open (Disabled)
JP48 Chassis/Overheat Fan Select Closed (Chassis)
Connector Description
ATX POWER Primary ATX Power Connector
COM1/COM2 COM1/COM2 Serial Port Connector
CPU1/CPU2 CPU 1 and CPU2 Sockets
CPU CHS FAN CPU 1 & 2 Chassis Fan Headers
DIMM#1A-DIMM#2B Memory (RAM) Slots
JA1 Ultra160 LVD SCSI CH A Connector
JA2 Ultra160 LVD SCSI CH B Connector
JD1 JBT1/WD/IR/CIR/USB2/PWRLED/SPKR
JF2 Front Control Panel Connector
JP7 Floppy Disk Drive Connector
JP8 Third Power Supply Fail Header
JP35 Keylock Header
J2A/J3A IDE#1/#2 Hard Disk Drive Connectors
J15 Secondary ATX Power Connector
J28 Keyboard Port
J29 Mouse Port
LAN1/2 Ethernet Ports
OHLED Overheat LED Header
USB0/1 Universal Serial Bus Ports
VGA VGA Display (Monitor) Port
WOL Wake-on-LAN Header
WOR Wake-on-Ring Header