SUPER MICRO Computer SUPERSERVER 6012P-6 - Manual (Page 54)

5-18
S UPERSERVER 6012P-6 User’s Manual
Chassis/Overheat Fan
Select
JP33 allows you to select to use ei-
ther the CPU fan or the Chassis
fan. The default position is open to
select the CPU fan. The CPU Chas-
sis fan is intended for use with
Supermicro chassis. See the table
on the right for jumper settings.
Jumper
Position
Open
Closed
Definition
CPU
CPU Chassis
CPU Chassis/CPU Fan
Select Jumper Settings
(JP33)
LAN1 Enable/Disable
Change the setting of jumper JP3
to enable or disable the onboard
LAN1 or NIC (Network Interface
Card) on the motherboard. See
the table on the right for jumper
settings. The default setting is
enabled
Jumper
Position
Pins 1-2
Pins 2-3
Definition
Enabled
Disabled
LAN1 (NIC)
Enable/Disable
Jumper Settings
(JP3)
LAN2 Enable/Disable
Change the setting of jumper JP27
to enable or disable the onboard
LAN2 or NIC (Network Interface
Card) on the motherboard. See
the table on the right for jumper
settings. The default setting is
enabled.
Jumper
Position
Pins 1-2
Pins 2-3
Definition
Enabled
Disabled
LAN2 (NIC)
Enable/Disable
Jumper Settings
(JP27)
VGA Enable/Disable
JP4 allows you to enable or disable
the VGA port. The default position
is on pins 1 and 2 to enable VGA.
S e e t h e t a b l e o n t h e r i g h t f o r
jumper settings.
Jumper
Position
1-2
2-3
Definition
Enabled
Disabled
VGA Enable/Disable
Jumper Settings
(JP4)