StorageTek L700 - Manual (Page 27)

96047 First Edition 3-5
Installation Overview
c. Turn-on (to the right) the two circuit breakers on the rear of the switch
(Load 1 and Load 2).
d. Press the power button on the front of the outlet strip.
19. Make sure all components (library, tape drives, fans, and UPS) are on.
20. Follow the directions on the APC publication, WEB/SNMP Management
Card, Installation and Quick Start Manual to configure the TCP/IP settings.
This document and a CD-ROM are provided in the UPS packaging.
Figure 3-3 shows the cables and connections for the UPS:
Figure 3-3. Block Diagram
C67336
UPS A
REDUNDANT
SWITCH
L180/L700
OUTLET STRIP
FAN
UPS B
940-0103
SERIAL
PORT
CABLE
940-0103
SERIAL
PORT
CABLE