Samsung D372WH(i) - Manual (Page 30)

ENGLISH
30 30
Displaying the Date/Time (Date/Time)
✤ The Date/Time function works in <Camera>/<Player>/<M.Cam>/<M.Player> modes.
➥page 19
✤ The date and time are automatically recorded on a special data area of the tape.
1. Set the [Power] switch to [CAMERA] or [PLAYER].
2. Set the [Mode] switch to [TAPE] or [CARD]. (VP-D375W(i)/D975W(i) only)
3. Press the [MENU] button.
■ The menu list will appear.
4. Press the [
▲ / ▼] button to select <Display>, then press the [OK] button.
5. Press the [
▲ / ▼] button to select <Date/Time>, then press the [OK] button.
6. Press the [
▲ / ▼] button to select the display type of the Date/Time, then press the
[OK] button.
■ Display type of the Date/Time: <Off>, <Date>, <Time>, <Date&Time>.
7. To exit, press the [MENU] button.
[ Notes ]
■ The Date/Time will read <00:00 1.JAN.2007> in the following conditions.
- During playback of a blank section of a tape.
- If the tape was recorded before setting the clock function in the Camcorder.
- When the Lithium Battery becomes weak or dead.
■ Before you use the <Date/Time> function, you must set the clock. ➥page 23
Initial Setting : Display Menu Setting
Move Select Exit MENU OK
Camera Mode
√Display
LCD Bright
LCD Colour
Date/Time
TV Display
4
Move Select Exit MENU OK
Off
Date
Time
Date&Time
1
√Off
√On
6
Camera Mode
Back
LCD Bright
LCD Colour
Date/Time
TV Display
01227G VPD371 UK~042 2/1/07 12:03 PM Page 30