Samsung D372WH(i) - Manual (Page 70)

✤ The copying function works only in <Player> Mode. ➥ page 19
✤ Connect your Camcorder to a VCR using the AV jack to copy the
recording from a camcorder tape onto a VCR tape.
✤ Set the <AV In/Out> to <Out> before copying to an external device.
➥ page 69
1. Set the [Power] switch to [PLAYER].
2. Set the [Mode] switch to [TAPE]. (VP-D375W(i)/D975W(i) only)
3. Insert the tape you want to copy in your Camcorder.
4. Insert a new video tape in your VCR.
5. Connect the Camcorder to your VCR with the Audio/Video cable.
■ Connect the Audio/Video cable to the input jack on your VCR.
■ The yellow jack: Video
■ The white jack: Audio(L)-mono
■ The red jack: Audio(R)
6. Press the Record button on your VCR to start recording.
7. Play the tape on your Camcorder. Please refer to Page 60 for Playing.
■ Set the <TV Display> to <Off> in the MENU. ➥ page 31
When Copying is Complete
Stop recording on your VCR, then press the [
■ (STOP)] button on your Camcorder.
[ Notes ]
■ If you operate the Camcorder connected to another device, always power the Camcorder from household AC outlet
using the AC power adapter.
■ You can also copy images to other external storage media using this camcorder.
ENGLISH
70 70
Connection
Copying a Camcorder Tape onto a Video Tape
Camcorder
Audio/Video Cable
Signal flow
VCR
Audio/Video
Cable
VP-D371(i)/D371W(i)/
D372WH(i)
VP-D375W(i)/D975W(i)
œ œ
01227G VPD371 UK~071 2/1/07 12:04 PM Page 70