User instructions, Only run the soak program with half loads – Smeg LSP1449B User Manual

Page 11

Advertising
background image

User instructions

DURATION

CONSUMPTION

PROGRAM

SELECTION

TYPE AND GRADE DIRT

PROGRESS

PROGRAM

MINUTES

(2)

WATER

LITRES (1)

POWER
KWh (2)

SOAK

PANS AND DISHES

AWAITING COMPLETION OF

THE LOAD

Cold prewash

15

6

0,03

QUICK

DELICATE DISHES WITH

NORMAL DIRT

Wash at 38°C
Cold rinse
Rinse at 58°C

45

13

0,80

ECO

DISHES WITH NORMAL

DIRT, WASHED

IMMEDIATELY AFTER USE

Wash at 55°C
Cold rinse
Rinse at 69°C
Dry

100

14

1,20

DAILY

DISHES WITH NORMAL

DIRT, WASHED

IMMEDIATELY AFTER USE

Wash at 65°C
Cold rinse
Rinse at 69°C
Dry

85

13

1,25

STRONG

VERY DIRTY PANS AND

DISHES, WASHED

IMMEDIATELY AFTER USE

Wash at 70°C
2 cold rinses
Rinse at 70°C
Dry

95

17

1,45



Only run the soak program with half loads.

The HALF-LOAD option (4) is available for all programs, except the soak program.

The "STRONG" and “SUPER” program terminates with an anti-bacteria rinse that ensures a
further reduction in the bacteria level.
If the temperature falls during this rinse stage (e.g. because the door is opened or due to a
power blackout), the light (7) of the current program flashes to warn that the anti-bacteria effect
is not guaranteed.
(1)

Average power consumption with the softener set on level 2.

(2)

The cycle duration and power consumption may vary according to the water and room
temperatures, and the type and amount of dishes.

















10

Advertising
This manual is related to the following products: