Caution, Modifiers, Option buttons – Siemens WFXD5200UC User Manual

Page 19

Advertising
background image

18

spin

Spin cycle for spinning wet, hand

washed laundry.

Water is drained before and during

the spin cycle.
soak

A cycle for preĆtreatment of heavily

stained items. The soak cycle lasts

2 hours and ends with a short spin

cycle.
drain

Can be used to drain water without

a spin cycle.
Temperature Settings

The following wash temperatures

are available:
tempPlus:

150

°

F (66

°

C)

(only regular/cotton)
hot:

125

°

F (52

°

C)

warm:

95

°

F (35

°

C)

cold:

60

°

F (15

°

C)

Maximum spin speeds of the

programs

The indicator light max spin speed" is lit

red.

Revolutions

per minute

Program

1000

regular/cotton

800

permanent press

600

delicates

800

woolCare

600

active wear

1000

sprintWash

1000

spin

Reduced spin

The indicator light reduced spin" is lit red.
Only if you have selected a reduced

spin speed for gentle treatment of

your laundry.
Gentle spin speeds

The indicator light Gentle spin speed" is lit

red.

Revolutions

per minute

Program

400

hand wash

400

soak

no final spin

The indicator light no final spin" is

lit red.
For delicate laundry, the water

remains in the machine after the last

rinse.
Use this setting to avoid creasing if

the clothing cannot be taken out of

the washing machine immediately

upon completion of the cycle.

d

CAUTION

d

Before unloading you must drain

the remaining water by selecting

drain or spin and starting the

machine.

Modifiers

spin selection

Preset cycle setting of max. spin

speed can be changed.

Press this button until the the

desired setting lits up.
delay start

Before starting a program you can

modify by when the cycle should be

started.

Press delay start button. The

display shows the start time

0:00

.

The time can be delayed up to a

maximum of 19 hours (with 1 hour

increments) by pressing the delay

start button again.
The start time begins running

immediately after pushing the

start/pause button. This is

indicated by the points between the

digits flashing.

i

Changes to the start time are

possible at any time, press the

delay start button until the

new time appears.

i

If the program is changed or if

the program is interrupted, the

preselected start time is also

interrupted. The ready in time

of the program is displayed.

The start time must be

reselected.

Option buttons

bleach

When this button is pressed,

a bleach cycle will be added to

the selected cycle.

The washing cycle time is extended

accordingly.
extra rinse

When this button is pressed, an

additional rinsing cycle will be

added to the selected cycle.

Washing cycle time is extended

accordingly.

Advertising