Upgrading the software – Samsung BN68-01412T-00 User Manual
Page 47
English -
Upgrading the Software
To keep your product up-to-date with new Digital Television features then software upgrades are periodically broadcast as
part of the normal Television signal. It will automatically detect these signals and display the software upgrade banner. You
are given the option to install the upgrade.
1. Insert a USB drive containing the firmware upgrade into the WISELINK port
on the side of the TV.
2. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the
ENTER button.
3. Press the ▲ or ▼ button to select “Software Upgrade”, then press the
ENTER button.
4. Press the ▲ or ▼ button to select “BY USB”, “BY Channel” or “Standby
Mode Upgrade”. Press the
ENTER button.
BY USB :
-
Preset : Insert a USB drive containing the firmware upgrade into TV.
Please be careful to not disconnect the power or remove the USB
drive while upgrades are being applied. The TV will turn off and turn on
automatically after completing the firmware upgrade. Please check the
firmware version after the upgrades are complete. When software is
upgraded, video and audio settings you have made will return to their
default (factory) settings. We recommend you write down your settings so
that you can easily reset them after the upgrade.
BY Channel :
Upgrades the software using the broadcasting signal.
Standby Mode Upgrade :
To continue software upgrade with master power on, Select On by pressing
the ▲ or ▼ button. 45 minutes after entering standby mode, a manual
upgrade is automatically conducted. Since the power of the unit is turned
on internally, the screen may be on slightly for the LCD product. This
phenomenon may continue for more than 1 hour until the software upgrade is
completed.
Alternative Software :
To display the software version information.
➣
Setup
Energy Saving
: Off
PIP
Software Upgrade
►
Common Interface
TV Side Panel
USB Drive
Software Upgrade
Current Version
2008/01/01_000075
BY USB
►
BY Channel
Standby Mode Upgrade : On
Alternative Software
----/--/--_--------
Return
Enter
Move
BN68-01412T-00Eng.indb 45
2008-08-14 �� 2:44:05