Telnet server commands, Ip telnet server, Telnet server commands -43 – SMC Networks SMC TigerStack 1000 SMC8748M User Manual
Page 315: Ip telnet server -43, Table 4-14 telnet server commands -43
S
YSTEM
M
ANAGEMENT
C
OMMANDS
4-43
Default Setting
443
Command Mode
Global Configuration
Command Usage
• You cannot configure the HTTP and HTTPS servers to use the same
port.
• If you change the HTTPS port number, clients attempting to connect
to the HTTPS server must specify the port number in the URL, in this
format: https://device:port_number
Example
Related Commands
Telnet Server Commands
ip telnet server
This command allows this device to be monitored or configured from
Telnet. Use the no form to disable this function.
Syntax
[no] ip telnet server
Console(config)#ip http secure-port 1000
Console(config)#
Table 4-14 Telnet Server Commands
Command
Function
Mode Page
ip telnet server
Allows the switch to be monitored or
configured from Telnet
GC
ip telnet server port Specifies the port to be used by the Telnet
interface
GC