Shaw ATLAS PVR Universal Remote Control User Manual
Page 19
19
Programming the Master Power Key
5.
Repeat step 4 up to four more times to add the
second, third, fourth, and fifth device, as
desired.
6.
To save the settings and exit the program:
Using the Master Power Key
You will see the devices turn on or off according to the
programmed sequence.
Clearing the Master Power Key
1.
On the remote control, press and hold SETUP
until the last-selected device key blinks twice.
2.
Enter 9 9 5. The last-selected device key
blinks twice.
3.
Press PWR once.
4.
For the first device you want in the power on
sequence, press a device key (e.g., CBL) once.
Then press PWR once.
a.
Press CBL once.
b.
Press and hold SETUP until the CBL key blinks
twice.
1.
After programming, point the remote control
at the devices. Press CBL once.
2.
Press PWR once to sequentially turn the
programmed home entertainment devices on
or off.
1.
On the remote control, press and hold SETUP
until the last-selected device key blinks twice.
2.
Enter 9 9 5. The last-selected device key
blinks twice.
3.
Press and release the MASTER POWER key.
Atlas Shaw M1055FR Rev 1 Eng only.fm Page 19 Wednesday, October 5, 2005 5:28 PM