Selecting effects, Flow of operations, Effect – Sony MKS-2010 User Manual
Page 56
Cha
p
te
r 5
Ba
si
c Op
erat
io
ns
56
Selecting Effects
Selecting Effects
When you have selected [EFF] as the transition type (see page 54) or selected
[WIPE] (in the PGM/PST bank of the 1.5M/E panel), select the effect to use.
Effects selectable in the PGM/PST bank are limited to basic wipes. The M/E
bank can select basic wipes and other effects as well. This section refers to all
of these together as simply “effects.”
For more information about effects, see “Effect Types” (page 60).
Flow of Operations
The following figure shows a typical flow of operations when using the MFS-
2000 system. For details about operations, see the pages in parentheses ( ).
You can select effects using either the Flexi Pad control block or menus.
Basic operations
: Always done
: Done as required
: Done at this stage
Modify the video border
Prepare the transition
Execute the transition
Compose video by keying
Use internally generated signals
Fade out to black
When mix or
preset color mix
is selected
Advanced operations
Advanced effect operations
a)
Advanced key operations
Select video
a) Some patterns cannot be modified in
this way. For details, refer to “Effect
Pattern Transformations and
Modifications” in the Appendix
(separate document).
Change the position and size of the effect pattern
Color correction
Frame memory
Snapshots
Safe title
Select the transition type
Select an effect
Select the operating channels