Cd p lay b a ck – Sharp CD-ES77 User Manual
Page 17
17
03/11/18
CD-ES700_77(U)2.fm
CD-ES700
TINSEA011AWZZ
CD-ES77
C
D
P
lay
b
a
ck
"
Playback will begin from track 1 on disc 1. After that disc finishes
playing, the next disc will automatically play.
"
After the last track on the fifth disc is played, the CD player stops
automatically.
"
When there is no CD in one of the disc trays (1 - 5), the empty
tray will be skipped to the next tray with a CD.
To exchange other CDs while playing a disc:
Press one of the 1 - 5 buttons for the disc not being played and
within 5 seconds, press the OPEN/CLOSE button and exchange
discs.
To remove the CDs:
In the stop mode, press the 1 - 5 button and within 5 seconds,
press the OPEN/CLOSE button.
Caution:
"
Do not place two CDs in one disc tray.
"
Do not play discs with special shapes (heart- or octagon-shaped)
as it may cause malfunctions.
"
Do not push the disc tray while it is moving.
"
If the power fails while the tray is open, wait until the power is
restored.
"
If the disc tray is stopped with force, "ER-CD20" will appear on
the display for 3 seconds and the unit will not function. If this
occurs, press the ON/STAND-BY button to enter the power
stand-by mode and then turn the power on again.
"
If TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.
"
If a disc is damaged, dirty, or loaded upside down, the disc will
skip or not play.
Auto power on function:
When you press any of the following buttons, the unit turns on.
"
CD button (main unit and remote control): The unit turns on and
the "CD" function is activated.
"
/ button (main unit and remote control): The unit turns on
and playback of the last function starts (CD/TAPE/TUNER/
GAME).
!
Various CD functions
Notes:
Function
Main unit
Remote
control
Operation
Play
Press in the stop
mode.
Stop
Press in the playback
mode.
Pause
Press in the playback
mode. Press the /
button to resume play-
back from the paused
point.
Track up/
Track down
Press in the playback
or stop mode.
If you press the button
in the stop mode,
press the / button
to start the desired
track.
Fast for-
ward/Fast
reverse
Press and hold down
in the playback mode.
Release the button to
resume playback.
"
Track up/track down and fast forward/fast reverse are possible
only within individual discs.
"
When the end of the last track is reached during fast forward, "
END" will appear on the display and CD operation will be paused.
When the beginning of the first track is reached during fast re-
verse, the unit will enter the playback mode.
( : Last track number)
4