Ta pe re cor din g – Sharp CD-ES77 User Manual
Page 25
25
03/11/14
CD-ES700_77(U)3.fm
CD-ES700
TINSEA011AWZZ
CD-ES77
T
a
pe Re
cor
din
g
!
Recording from a CD (CDs)
You can record the desired CD using the DIRECT PLAY button.
To stop recording:
Press the button.
The CD and tape will stop.
1
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button.
3
Load a cassette into the TAPE 2 cassette compartment
with the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
4
Press the
button.
Recording will be paused.
5
Press one of the 1 - 5 buttons to select the desired disc.
6
Within 5 seconds, press the DIRECT PLAY button to start
recording.
"
Recording is started from the selected CD. When the play-
back of the last track is finished or the end of the tape is
reached, the CD and the cassette will stop automatically.
"
CD playback will start approximately 7 seconds after the
tape starts.
7