Shuttle Computer Group XPC SA76 - Manual (Page 21)

7
English

PnP/PCI Configurations
This section describes the configuration of PCI bus system. PCI or Personal Com-
puter Interconnection is a system which allows I/O devices to operate at the speed
CPU itself keeps when CPU communicating with its own special components.
This section covers some very technical items, and it is strongly recom-mended
that only experienced users should make any changes to the default settings.
Init Display First
This item is used to determine initial device when system power on.

The choice: PCI Slot, Onboard or PCI Ex.
Resource Controlled By
The Award Plug-and-Play BIOS has the capacity to automatically
configure all of the boot and Plug-and-Play compatible devices.
However, this capability means absolutely nothing unless you are
using a Plug-and-Play operating system such as Windows 9.

The choice: Auto(ESCD) or Manual.
IRQ///7/0//2// assigned
This item allows you to determine the IRQ assigned to the ISA bus and
is not available to any PCI slot. Legacy ISA for devices is compliant with
the original PC AT bus specification; PCI/ISA PnP for devices is compli-
ant with the Plug-and-Play standard whether designed for PCI or ISA bus
architecture.

The choice: PCI Device or Reserved.
PCI/VGA Palette Snoop
It determines whether the MPEG ISA/VESA VGA Cards can work with
PCI/VGA or not. If you have MPEG ISA/VESA VGA Cards and PCI/VGA
Card worked, Enable this field. Otherwise, please Disable it.

The choice: Enabled or Disabled.