Sunfire Radio - Manual (Page 39)

User's Manual
39
CHAPTER 4
MAIN MENU
TRIMS
MODES
TONE
INPUTS
SETTINGS SETTINGS
MAIN ZONE
ZONE 2
SPEAKERS
VIDEO
SOFTWARE
CONTROL
AMPLIFIER
Speaker Position
This menu allows you to enter the
distance from your listening position
to the various speakers. The Receiver
will then automatically adjust and
correct the speaker delay times. The
sound from each speaker should ar-
rive at the listener at the correct time.
The distance measurement is not criti-
cal, and a visual estimate is usually
adequate.
The procedure is as follows:
1. Measure or visually estimate
(in feet) how far each speaker
is away from the center listen-
ing position of your home
theater.
2. In the OSD menu, use the
remote control joystick arrow
buttons to enter the distance in
feet for each speaker.
3. The Receiver automatically
sets the appropriate delays for
each speaker, so the sounds
arrive at the listening position
at the correct time.
4. Use this table to record your
speaker distance measure-
ments.
SPEAKERS
SIZE
POSITION
CALIBRATION
L-R CROSSOVER 110 HZ
C-SURR CROSSOVER 90
SUBWFR MODE NORMAL
Speaker Position Menu
SPEAKER POSITION
L MAIN/SIDE 4 ft 6in
R MAIN/SIDE 4 ft 6in
CENTER 3 ft 0in
L SURR 4 ft 0in
R SURR 4 ft 0in
L SURR BACK 5 ft 0in
R SURR BACK 5 ft 0in
SPEAKER DISTANCE
LEFT MAIN/SIDE
RIGHT MAIN/SIDE
CENTER
LEFT SURROUND
RIGHT SURROUND
LEFT SURR BACK
RIGHT SURR BACK