Connecting the video out to your tv, Method 1 : hdmi – Samsung HT-BD2S User Manual
Page 24
3
En
g
●
CO
nn
ECTIO
n
S
COnnECTIng THE VIDEO OUT TO YOUR TV
Choose one of the three methods for connecting to a TV.
METHOD 1 : HDMI
Connect the HDMI cable from the HDMI OUT jack on the back of the Blu-ray Home Theater to the HDMI
IN jack on your TV.
Depending on your TV, certain HDMI output resolutions may not work.
If an HDMI cable is connected from the player to a TV, the Blu-ray Home Theater’s output is set to
HDMI automatically within 10 seconds.
If you are using the Anynet + feature (see page 42) and Component and HDMI are both
connected, HDMI mode is automatically selected.
When you connect the player to the TV using the HDMI cable for the first time or to a new TV, the
HDMI output resolution will be automatically set to the highest provided by the TV.
If you connect a Samsung TV to the Blu-ray Home Theater using an HDMI cable, the player can
be easily operated using the TV remote control. (This is only available with Samsung TVs that
support the Anynet+ feature.)
(See page 42)
If the HDMI cable is connected or removed during playback of a CDDA, MP3 or JPEG file, the
player will stop playing.
After making the video connection, set the Video input source on your TV to match the
corresponding
Video output (HDMI, Component or Composite) on your Home theater.
See your TV owner's manual for more information on how to select the TV's Video Input source.
M
METHOD3
(supplied)
METHOD2
METHOD1
HT-BD2_XAA_0210.indd 23
2008-02-11 �� 11:27:24