Sony Cyber-shot 3-295-460-12(1) - Manual (Page 43)

43
B
as
ic
Oper
at
ions
Shooting with manual adjustment
You can manually adjust the shutter speed and the aperture values.
1 Select M with the mode dial.
2 Select a shutter speed with the wheel dial (page 39).
3 Select an aperture value with the wheel dial (page 39).
The difference between the settings and proper exposure judged by the camera appears as an EV
value (page 40) on the screen. 0EV indicates the value judged as the most suitable by the camera.
4 Shoot the image.
• The camera maintains the setting even when the power is turned off. Once you set a value you like, you
can reproduce the same exposure by simply setting the mode dial to M.
• If the proper exposure is not obtained after making the settings, the setting value indicators on the screen
flash when the shutter button is pressed halfway down. You can shoot in this condition, but we
recommend that you adjust the flashing values again.
• The flash is set to (Flash forced on) or (Flash forced off).
Selects a luminous sensitivity with units of ISO. The larger the number, the higher the
sensitivity.
1 Select an ISO item with the wheel dial (page 39).
2 Press z on the control button.
ISO value turns yellow.
3 Select an ISO value with the wheel dial.
4 Press z.
Shooting with manual exposure mode
ISO: Selecting a luminous sensitivity
Low ISO sensitivity High ISO sensitivity
ISO value (yellow)