Sony Cyber-shot 3-295-460-12(1) - Manual (Page 72)

72
Shooting menu For details on the operation 1 page 60
Analyzes the scene to be shot, and improves the image quality by automatic correction.
• DRO is an abbreviation for “Dynamic Range Optimizer,” a function that automatically optimizes the
difference between light and dark parts of an image.
• Depending on shooting conditions, it may not be possible to obtain correction effects.
• Note the following points when [DRO plus] is set.
– Time is required for image processing.
– You can select only from [ISO AUTO], [ISO 80] to [ISO 400].
– When Burst/bracket shooting is selected, [DRO plus] is canceled and [DRO standard] is set.
Adjusts the resolution/noise balance of the recording images.
• Depending on the settings at the time of recording, the Noise Reduction level cannot be adjusted.
DRO: Optimizing the brightness and contrast
(Off) Does not adjust.
(DRO standard) The camera automatically adjusts the brightness and contrast
of the entire scene.
(DRO plus) The camera automatically adjusts brightness and contrast of
the images area-by-area.
Noise Reduction: Adjusting the Noise Reduction
(–) Toward–: Weakens noise reduction. This setting puts
emphasis on resolution of images.
(Normal)
(+) Toward+: Strengthens noise reduction. This setting puts
emphasis on elimination of noise.