Sony HWS-BTA2W - Manual (Page 18)

18
US
ID SE T
RX TX
Precautions
On BLUETOOTH communication
• BLUETOOTH wireless technology operates
within a range of about 10 meters (about 30
feet). Maximum communication range may
vary depending on obstacles (person, metal,
wall, etc.) or electromagnetic environment.
• The following conditions may affect the
sensitivity of BLUETOOTH communication.
– There is an obstacle such as a person, metal,
or wall between this unit and BLUETOOTH
device.
– A device using 2.4 GHz frequency, such as a
wireless LAN device, cordless telephone, or
microwave oven, is in use near this unit.
– This unit is installed horizontally on a desk
made of steel.
• Because BLUETOOTH devices and wireless
LAN (IEEE802.11b/g) use the same frequency,
microwave interference may occur and
resulting in communication speed
deterioration, noise, or invalid connection if
this unit is used near a wireless LAN device. In
such a case, perform the following.
– Use this unit at least 10 m (about 30 ft) away
from the wireless LAN device.
– If this unit is used within 10 m (about 30 ft)
of a wireless LAN device, turn off the
wireless LAN device.
– Install this unit and BLUETOOTH device as
near to each other as possible.
• Microwaves emitting from a BLUETOOTH
device may affect the operation of electronic
medical devices. Turn off this unit and other
BLUETOOTH devices in the following
locations, as it may cause an accident.
– where inflammable gas is present, in a
hospital, train, airplane, or a gas station
– near automatic doors or a fire alarm
• This unit supports security capabilities that
comply with the BLUETOOTH standard to
provide a secure connection when the
BLUETOOTH wireless technology is used, but
security may not be enough depending on the
setting. Be careful when communicating using
BLUETOOTH wireless technology.
• We do not take any responsibility for the
leakage of information during BLUETOOTH
communication.
• Connection with all BLUETOOTH devices
cannot be guaranteed.
– A device featuring BLUETOOTH function is
required to conform to the BLUETOOTH
standard specified by BLUETOOTH SIG,
and be authenticated.
– Even if the connected device conforms to the
above mentioned BLUETOOTH standard,
some devices may not be connected or work
correctly, depending on the features or
specifications of the device.
• Depending on the device to be connected, it
may require some time to start communication.
Limited performance
This unit
Steel cabinet
Optimal performance
ADDITIONAL INFORMATION