Troubleshooting, When using as a receiver, When using as a transmitter – Sony HWS-BTA2W User Manual
Page 21: No sound, Low sound level, Distorted sound
21
US
Troubleshooting
If you run into any problems using this unit, use the following checklist. Should any
problem persist, consult your nearest Sony dealer.
When using as a receiver
No sound
, Check the connection between this unit and
the stereo audio output device connected to
this unit.
, Check that both this unit and the
BLUETOOTH stereo audio source device
are turned on.
, Ensure that this unit is not too far from the
BLUETOOTH stereo audio source device, or
this unit is not receiving interference from a
wireless LAN, other 2.4 GHz wireless
device, or microwave oven.
, Check that the BLUETOOTH connection is
made properly between this unit and the
BLUETOOTH stereo audio source device.
, Turn up the volume of the stereo audio
output device.
, Turn up the volume of the BLUETOOTH
stereo audio source device as high as
possible to the extent that sound is not
distorted. For details on volume adjustment,
refer to the operating instructions supplied
with the BLUETOOTH stereo audio source
device.
, Pair this unit and the BLUETOOTH stereo
audio source device again.
Low sound level
, Turn up the volume of the BLUETOOTH
stereo audio source device as high as
possible to the extent that sound is not
distorted. For details on volume adjustment,
refer to the operating instructions supplied
with the BLUETOOTH stereo audio source
device.
, Turn up the volume of the stereo audio
output device.
Distorted sound
, Turn down the volume of the BLUETOOTH
stereo audio source device to the point where
the sound is no longer distorted. For details
on volume adjustment, refer to the operating
instructions supplied with the BLUETOOTH
stereo audio source device.
When using as a transmitter
No sound
, Check the connection between this unit and
the stereo audio source device connected to
this unit.
, Check that both this unit and the
BLUETOOTH stereo audio receiving device
are turned on.
, Ensure that this unit is not too far from the
BLUETOOTH stereo audio receiving device,
or this unit is not receiving interference from
a wireless LAN, other 2.4 GHz wireless
device, or microwave oven.
, Check that BLUETOOTH connection is
made properly between this unit and the
BLUETOOTH stereo audio receiving device.
, Turn up the volume of the BLUETOOTH
stereo audio receiving device. For details on
volume adjustment, refer to the operating
instructions supplied with the BLUETOOTH
stereo audio receiving device.
, Turn up the volume of the stereo audio
source device as high as possible to the
extent that sound is not distorted.
, Pair this unit and the BLUETOOTH stereo
audio receiving device again.
Low sound level
, Turn up the volume of the stereo audio
source device as high as possible to the
extent that sound is not distorted.
, Turn up the volume of the BLUETOOTH
stereo audio receiving device. For details on
volume adjustment, refer to the operating
instructions supplied with the BLUETOOTH
stereo audio receiving device.
Continued