Sharp LL-171G - Manual (Page 15)

16
Turning the power off
1. Turn the computer off.
2. Press the monitor's power button.
The power LED will disappear.
If the monitor will not be used for a long time, turn
off the main power switch of the monitor, and
remove the power plug from the outlet.
Connecting the monitor and turning the monitor on and off
Changing between input terminals
[LL-171G]
Use the INPUT button to switch between signal
input terminals.
Analog RGB input terminal DVI-I input terminal
INPUT-1
<ANALOG>
INPUT-2
< >
INPUT
<ANALOG> or <DIGITAL>
When using a 2-input cable
Analog RGB input terminal
INPUT2-A
<ANALOG>
INPUT2-D
<DIGITAL>
INPUT
INPUT-1
<ANALOG>
INPUT INPUT
Note:
- When there is no input signal, [NO SIGNAL] is
displayed.
OFF
Turn the computer
off.
Press power button.
DVI-I input terminal
(analog)
DVI-I input terminal
(digital)
171AG_gb.P65 12/4/2003, 1:14 PM 16