Sealife DC250 - Manual (Page 23)

23
EE
Choosing the language
When you first turn the camera on, the language
setting screen appears, prompting you to choose
a language for displayed information on the LCD
monitor. Follow the steps below to set the OSD
(On-Screen Display) language.
1. Select a language that you prefer by using the
/ button.
2. Press the OK button to confirm.
• The language setting will be retained even if
the camera is turned off.
• The language setting screen is located in the
set-up menu. Turn mode dial to “set-up.”
Setting the date and time
The Date/Time screen will be presented if/when:
■ Camera is turned on for the first time (after setting the language)
■ Camera is turned on after removing or replacing the batteries.
When the date and time setting screen appears, follow these steps to set the
correct date and time. You may skip this procedure by pressing the OK button
repeatedly.
1. Enter the values of the year, month, day and time fields by using the
/ /
/ button. Press the OK button after each field is set.
■ To increase a value, press the / button.
■ To decrease a value, press the / button.
• The date/time screen is located in the set-up menu.
• Turn mode dial to “set-up.”