Sealife DC250 - Manual (Page 34)

34
E
Displaying thumbnail images
This function allows you to view nine thumbnail
images on the LCD monitor simultaneously so you
may search for a particular image.
1. Turn the mode dial to the
mode and power on
the camera.
2. Press the button once.
■ The image information appears on the LCD
monitor.
3. Press the button again.
■ Nine thumbnail images appear on the LCD monitor (assuming there are nine
or more images in memory).
■ To view a full-size image, press the OK button after selecting it by using the
/ button.
• By pressing the button repeatedly, the image will show as follows.
Image only
➔ Image and OSD (on-screen display) ➔ Thumbnail image display
Slideshow display
The slideshow function enables you to playback
your images back automatically in sequential order
as a slide show. This is a very useful and entertain-
ing feature for reviewing recorded images and for
presentations.
1. Turn the mode dial to the
mode and power on
the camera.
2. Press the button and move to SLIDE SHOW by using the / button.
3. Set the playback interval by using the / button and then press the OK
button.
■ The slideshow starts, displaying your images on the LCD monitor, one by
one, at the set interval.
■ To stop the slideshow display, press the OK /
/ / button.
• You can adjust the slideshow display interval within the range of 2 sec. to 10 sec. For
interval setting, refer to SLIDE SHOW in the Playback menu.