Sony Data Projector VPL-CX150 - Manual (Page 25)

25
Connecting the Projector
Pr
oj
ec
tin
g
t
h
e
P
ict
ur
e
To connect to a video GBR/
Component output connector
A Stereo audio connecting cable (not supplied)
(Use a no-resistance cable.)
B Signal Cable (not supplied)
HD D-sub 15-pin (male)
↔ 3 × phono jack
• Set the aspect ratio using “Aspect” on the
Signal menu according to the input signal.
• When you connect the projector to a video
GBR output connector, select “Video GBR”
or when you connect the projector to a
component output connector, select
“Component” with the “Input-A Signal Sel.”
setting on the Setup menu.
Notes
NETWORK
INPUT C
RGB AUDIO
INPUT A
MONITOR AUDIO
OUTPUT S VIDEO AUDIO RS-232C
REMOTE VIDEO
VIDEO IN
RGB AUDIO
INPUT B
Side
to audio
output
(R)
VCR
to video
GBR/
component
output
to
audio
output
(L)