Adjustments and settings using a menu, Using a menu, B adjustments and settings using a menu – Sony Data Projector VPL-CX150 User Manual
Page 34: Press the menu key, Use the, Key to select a menu, then press the, Or enter key, Select an item, Make the setting or adjustment of an item, The menu appears
34
Using a MENU
B Adjustments and Settings Using a Menu
Using a MENU
The projector is equipped with an on-screen
menu for making various adjustments and
settings. Some of the adjustable/setting
items are displayed in a pop-up menu, in a
setting menu or adjustment menu with no
main menu, or in the next menu window. If
you select an item name followed by an
arrow (B), the next menu window with the
setting items appears.
To change the on-screen menu language, see
“Selecting the Menu Language” on page 29.
Display items
There are explanations for VPL-CX100,
VPL-CX120, VPL-CX125, VPL-CX150,
VPL-CX155 and VPL-CW125 all together
in this manual. Be please aware that VPL-
CX155 is mainly used for explanation of the
display, and there may be an item that is not
displayed due to the model.
1
Press the MENU key.
The menu appears.
2
Use the
v
or
V
key to select a menu,
then press the
B
or ENTER key.
The items that can be set or adjusted
with the selected menu appear. The item
presently selected is shown in yellow.
3
Select an item.
Use the v
or
V key to select the item,
then press the B or ENTER key.
The setting items are displayed in a pop-
up menu, in a setting menu, in an
adjustment menu or in the next menu
window.
4
Make the setting or adjustment of an
item.
• When changing the adjustment
level:
To increase the number, press the v
or
B
key.
To decrease the number, press the V
or
b key.
Press the ENTER key. The setting or
adjustment done is stored and the
previous screen is restored.
• When changing the setting:
Press the v
or
V key to select the
setting.
Press the ENTER or B key to restore
the previous screen.
Sel:
Set:
Exit:
Picture
Signal
Function
Setup
Installation
Information
Lamp Mode:
Standard
High Altitude Mode:
Off
IR Receiver:
Front & Rear
V Keystone:
Auto
Side Shot:
0
Image Flip:
Off
Background:
Blue
ID Mode:
All
Direct Power On:
Off
Sel:
Set:
Back:
Exit:
Picture
Signal
Function
Setup
Installation
Information
Status:
Language:
Input-A Signal Sel.:
Auto
Lamp Timer Reset
Color System:
English
On
Auto
NTSC3.58
PAL
SECAM
NTSC4.43
PAL-M
PAL-N
Items that can
be set
Pop-up menu
Setting menu
Adjustment menu
Sel:
Set:
Back:
Exit:
Picture
Signal
Function
Setup
Installation
Information
Adjust Picture
Standard
Contrast:
80
Brightness:
50
Gamma Mode:
Color Temp.:
High
Graphics
50
Sharpness:
Items that can
be set
Next menu window