Control panel – Sony Data Projector VPL-CX150 User Manual

Page 15

Advertising
background image

15

Location and Function of Controls (Main Unit)

Ov
e

rv

ie

w

a LAMP/COVER indicators

Flashes in orange under the following
conditions:
• A reception rate of 2 flashes when the

lamp cover or air filter cover is not
secured firmly.

• A reception rate of 3 flashes when the

lamp has reached the end of its life or
reaches a high temperature.

For details, see page 51.

b ON/STANDBY indicator

Lights up or flashes under the following
conditions:
– Lights in red when the AC power cord

is plugged into a wall outlet. Once the
projector is in standby mode, you can
turn it on with the ?/1 key.

– Flashes in red when the internal

temperature is high or the electrical
system has failed.

– Lights in green when the projector is

turned on, and when it is ready to
operate.

– Flashes in green from the time when

the projector is turned on until the
projector is ready to operate. Also,
flashes in green while the cooling fan
is running after the power is turned off
with the ?/1 key. The fan runs for
about 60 seconds after the power is
turned off.

– Lights in orange when the power

saving mode is on.

For details, see page 51.

c ?/1

(On/Standby) key

Turns on the projector when it is in
standby mode. When you push this key,
the ON/STANDBY indicator flashes in
green and then lights in green when the
projector is ready to operate.
To turn off the power, press the ?/1 key
twice according to the message or hold
the ?/1 key for about one second.

d INPUT key

Select the input signal. Each time you
press the key the input signal switches.

e KEYSTONE (Trapezoidal

distortion correction) key

Adjusts the trapezoidal distortion of the
image. Pressing this key, V KEYSTONE
(Vertical trapezoidal distortion
correction) adjustment menu is
displayed. Use the arrow keys (v/V/b/
B) for adjustment.
In the case of models VPL-CX125/
CX155/CW125, Side Shot (Horizontal
trapezoid distortion correction) can be
adjusted by pressing this button again.
Adjust it by the v/V/b/B key.

Control Panel

LAMP/

COVER

ON/

STANDBY

PUSH

ENTER

PIC

MUTING

INPUT

KEYSTONE

MENU

1

2

3

4

5

6

7

8

Advertising