Sony Data Projector VPL-CX150 - Manual (Page 36)

36
The Picture Menu
The Picture Menu
The Picture menu is used for adjusting the picture or volume.
Picture
Signal
Function
Setup
Installation
Information
Picture Mode: Standard
Adjust Picture
Sel: Set: Exit:
30 Volume:
Sel: Set: Back: Exit:
Picture
Signal
Function
Setup
Installation
Information
80
50
50
Adjust Picture Standard
Contrast:
Brightness:
Sharpness:
Gamma Mode:
Color Temp.: Low:
Graphics
Setting items Functions Initial setting
Picture Mode Selects the picture mode.
• Dynamic: Emphasizes the contrast to produce a
“dynamic” picture.
• Standard: Normally select this setting. If the picture
has roughness with the “Dynamic” setting, this
setting reduces the roughness.
• Natural: Selects for the color more similar to the
input picture.
Standard
Adjust Picture... The unit can store the setting values of the following sub menu items for
each “Dynamic,” “Standard” or “Natural” picture mode separately.
Contrast Adjusts the picture contrast. 80
Brightness Adjusts the picture brightness. 50
Color Adjusts color intensity. 50
Hue Adjusts color tones. The higher the setting, the more
greenish the picture becomes. The lower the setting,
the more purplish. 50
Sharpness Adjusts the picture sharpness. The higher the setting,
the sharper the picture becomes. The lower the setting,
the softer the picture becomes. 50
Gamma Mode Selects a gamma correction curve.
• Graphics: Improves the reproduction of halftones.
Photos can be reproduced in natural tones.
• Text: Contrasts black and white. Suitable for images
that contain lots of text.
Graphics
Color Temp. Select a desired color temperature to suit a picture.
When a computer signal
• High: Makes white part bluish.
• Middle: Makes white part reddish.
• Low: Makes white part greenish.
When a video signal
• High: Turns white part to a bluish and cool tone.
• Middle: Turns white part o a natural tone.
• Low: Turns white part to a reddish and warm tone.
Low
Volume Adjusts the volume. 30