Sony LMD-2140MD - Manual (Page 40)

Specifications
40
When an optional input adaptor is
installed
The unit is applicable to the following signal formats.
When BKM-220D/243HS is installed
When BKM-255DV is installed
When BKM-227W/229X is installed
* A slightly squashed picture is displayed at a little
lower position, because the picture is displayed in
1035/1080 picture ratio on a 16:9 screen. Adjust the
position to the center using the SHIFT V setting (on
page 32).
Input
System Signal standard BKM-220D BKM-243HS
575/50I ITU-R BT.656 a a
480/60I SMPTE 259M a a
1080/50I SMPTE 292M × a
1035/60I
*
SMPTE 292M × a
1080/60I SMPTE 292M × a
720/60P SMPTE 292M × a
Input
System Signal standard BKM-255DV
575/50I IEEE 1394-1995 a
480/60I IEEE 1394-1995 a
Input
System Signal standard
BKM-
227W BKM-
229X
575/50I EBU N10 × a
PAL ITU-R BT.624 a ×
480/60I SMPTE 253M × a
NTSC SMPTE 170M a ×
576/50P ITU-R BT.1358 × a
480/60P SMPTE 293M × a
1080/50I SMPTE 274M × a
1035/60I
*
SMPTE 260M/BTA S-001B × a
1080/60I SMPTE 274M/BTA S-001B × a
720/60P SMPTE 296M × a