Samsung SIR-S60W - Manual (Page 13)

Jacks and Cables Jacks and Cables
Please read through the description of the jacks and cables included with your
Multi-Satellite Receiver. Use these cables to connect your Multi-Satellite Receiver
to your TV, VCR, and phone line.
RF Jacks and Coaxial Cable
The TV OUT RF jack requires a coaxial cable connection.
It outputs monaural sound and a good TV picture. Use
this connection if audio/video jack connections are not
provided on the back of your TV set. Make this connection
with the provided RF coaxial cable. RF jacks are also used
for terrestrial antenna (IN FROM ANTENNA) and satellite
dish antenna (SATELLITE IN) input connections.
Audio/Video Jacks and Cables (RCA-type)
Audio/Video jacks and cables output stereo sound and a
better TV picture than the RF jacks and cables. Use these
jacks and cables to connect your receiver to your TV or
to other components such as a stereo receiver or amplifier.
The audio/video jacks found on the back of the receiver
and the audio/video cable connectors are color coded
(yellow for video, red for right audio and white for left
audio). If your TV set only has one audio input, connect
it to the red (right) audio cable connector.
Setting Up and Connecting
8
Please note that periodically, purchase information is sent from the
Multi-Satellite Receiver via your telephone line to a toll free 1-800 number.
These calls are typically made in the middle of the night; your phone is in use
for approximately 30 seconds.
DIRECTV requires your Multi-Satellite Receiver to be
connected to a telephone line. Use the TEL LINE jack and
the included telephone cord to complete this connection.
If your home does not have RJ-11 type phone jacks,
please contact your phone company to get one installed.
Telephone Jack and Cord