Sanyo SCP-4000 - Manual (Page 19)

9
Note: Use only SANYO-approved accessories.
Using unauthorized accessories may cause damage.
Charging with the AC Adapter
Use only approved adapter, with your Sprint PCS Phone.
1. Plug the AC adapter into a wall outlet.
2. Plug the other end into the bottom of your Sprint PCS Phone,
with the battery attached.
Charging a completely discharged standard Lithium Ion battery
takes up to three hours.
If your phone is turned on, the icon on the display will blink
while charging. The icon will stop blinking when charging is
complete.
If your phone is turned off, the icon on the display will blink
and “BATTERY CHARGING —Power Off” will show on the
display while charging. The icon will stop blinking when
charging is complete.
When the battery is completely discharged, you may wait for
several minutes until “BATTERY CHARGING” will show on
display.