Sanyo SCP-4000 - Manual (Page 57)

47
Call Guard for Roaming
When you are placing or receiving a roaming call, your phone’s
display notifies you that roaming rate will apply.
When you press TALK or OK , the display shows “Roaming Rate
applies. Select Roam Call to Proceed”, and then .
Now you have two options: To actually place a roaming call,
highlight and press OK . To stop placing a roaming
call, highlight and press OK .
When a roaming call comes in, the display shows “Roam Call”
blinking and highlighted. Once you press
TALK
or
OK , the display shows “Roaming Rate applies. Select Answer to
accept.” Then it goes back to the previous display.
Now you have two options: To actually accept a roaming call,
highlight , and press
OK
. Also, you can eliminate the
ringer tone of that call. To do so, highlight and
press OK .
To turn the Call Guard feature off so that you are no longer
prompted, highlight , then highlight and then
select .