Solid State Logic DUENDE - Manual (Page 25)

Duende User Guide
Page 25 of 29
BYPASS ALL: Engaging this button will bypass all channel processing whilst still routing the
signal through Duende. This avoids the time shift which occurs when a ‘hard’ bypass is done
using the default DAW control, allowing for easier A/B comparison between processed and
unprocessed signals.
6.6 Advanced Signal Routing Options
Channel Processing Order
There are two switches that control the order of the signal processing elements. These are the
‘Filters to INPUT’ switch in the Filter Section and the ‘Dynamics PRE EQ’ in the Dynamics Section.
The table below shows the effect of these:
Switch 1 Switch 2 Processing
Order
Equaliser
Filters
Dynamics
Filters to
INPUT
Filters
Equaliser
Dynamics
Dynamics PRE
EQ
Dynamics
Equaliser
Filters
Filters to
INPUT Dynamics PRE
EQ
Filters
Dynamics
Equaliser
Side Chain Processing Order
The EQ and filter sections can be assigned to the Dynamics sidechain using the DYN S/CH
switches in the respective sections. The table below shows the sidechain source and processing for
the various combinations of these:
Switch 1 Switch 2 SC Source Sidechain Processing order
Dynamics
Input
EQ to Dyn
S/C Dynamics
Input
Equaliser
Filters to DYN
S/C Dynamics
Input
Filters
EQ to Dyn
S/C Filters to Dyn
S/C Dynamics
Input
Equaliser
Filters