Samsung SV-645B - Manual (Page 10)

GB
17
GB
16
Presetting the Stations Automatically Displaying/Hiding On-Screen Information
Your VCR displays most information both on the VCR and the
television.
You can choose to display or hide this information on the television
screen (except for the Index, Programming MENU and
VIDEOPLUS+ functions
★
(SV-645B/SV-643B only), which cannot
be hidden).
1 Press MENU on the remote control.
Result:
The programming menu is displayed.
2 Press the corresponding " , ❷ or ➛ , ❿ buttons to select the
USER SET option.
3 Press the OK button to select this option.
Result:
The USER SET menu is displayed.
4 Press the corresponding " or ❷ buttons, until the OSD option is
selected.
5 To... Press ➛ or ❿ , until...
Display on-screen information ON is displayed.
Hide on-screen information OFF is displayed.
6 On completion, press MENU twice to exit the menu.
Your VCR output channel may need to be changed if the pictures
suffer from interference or if your TV cannot find the pictures.
Also, you can change the VCR output channel to adjust the
frequency in which information is displayed on the screen.
1 Press MENU on the remote control.
Result:
The programming menu is displayed.
2 Press the corresponding " , ❷ or ➛ , ❿ buttons to select the
INSTALLATION option.
3 Press the OK button to select this option.
Result:
The INSTALLATION menu is displayed.
4 Press the corresponding " or ❷ buttons, until the VCR OUTPUT
CH option is selected.
5 Select the required output channel (CH21~CH69) by pressing the
➛ or ❿ buttons.
6 On completion, press MENU twice to exit the menu.
Then tune your television again (see page 14).
Setting the VCR Output Channel
AUTO SET UP
PLEASE WAIT
2 %
I--------------------I
END: MENU
YOUR DATA WILL BE LOST
PRESS OK TO CONTINUE
MENU TO EXIT
☛
You do not need to preset the stations if you have already
set them automatically (see Plug & Auto Set Up on
page 13).
Your VCR contains a built-in tuner used to receive television
broadcasts.
You must preset the stations received through the tuner. This can
be done:
◆ Plug & Auto Set up (see page 13)
◆ Automatically
◆ Manually (see page 18)
You can store up to 80 stations.
1 Press the MENU button on the remote control.
Result:
The programming menu is displayed.
2 Press the corresponding " , ❷ or ➛ , ❿ buttons to select the
INSTALLATION option.
3 Press the OK button to select this option.
Result:
The INSTALLATION menu is displayed.
4 Press the corresponding " or ❷ buttons, until the AUTO SET
UP option is selected. And then press the ❿ button to select this
option.
Result:
A message appears, indicating that any channels
already preset on your VCR will be deleted.
5 Press OK to start the auto scanning.
Result:
◆ The PLEASE WAIT indication flashes on the
television screen.
◆ The first frequency band is scanned and the first
station found is displayed and stored.
◆ The VCR then searches for the second station and
so on.
◆ When the automatic scanning procedure has
finished, the VCR switches automatically to pro-
gramme 1.
➢
The number of stations automatically stored by the VCR
depends on the number of stations that it has found.
6 If you wish to cancel the auto scanning before the end, press the
MENU button three times to exit the menu.
➢
◆ The time and date are set automatically from the
broadcast signal. If the signal is weak or ghosting
occurs, the time and date may not be set automati-
cally. In this case, they should be set manually (see
page 15).
◆ Once the auto scanning procedure has finished, some
stations may have been stored more than once; select
the stations with the best reception and delete the
ones no longer required (see page 19).
INSTALLATION
PROG OPTIONS INSTALL
CLOCK BONUS LANG
INSTALL
" ❷!! ➛❿!! OK END: MENU
OPTIONS
USER SET
PROG OPTIONS INSTALL
CLOCK BONUS LANG
" ❷!! ➛❿!! OK END: MENU
OPTIONS
OSD :ON
TAPE SELECT :E180
COLOUR SYSTEM :AUTO
FORMAT 16:9 :AUTO
NICAM :ON
ECO. MODE :OFF
IPC :ON
" ❷ ❿ END: MENU
INSTALL
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH60
" ❷ ❿ END: MENU
INSTALLATION
PROG OPTIONS INSTALL
CLOCK BONUS LANG
INSTALL
" ❷!! ➛❿!! OK END: MENU
INSTALL
AUTO SET UP
MANUAL SET UP
VCR OUTPUT CH :CH60
" ❷ ❿ END: MENU