Samsung SV-645B - Manual (Page 17)

GB
29 28
The Picture Adjustment feature allows you to adjust the alignment
manually to obtain the best possible picture.
When noise bars or streaks appear during playback, adjust alignment
manually by pressing the TRK (
or ) buttons until the picture is clear
and stable.
Result: ◆ The tracking bar appears.
◆ The image is adjusted.
◆ The tracking bar disappears when you release the button.
Adjusting Picture Alignment Manually
This function allows you to play back any pre-recorded cassette.
1 Switch on both the television and your VCR.
2 Insert the video cassette to be played. If the safety tab on the
cassette is intact, press ❿ ll.
Otherwise, the cassette is played automatically.
➢
When a cassette is loaded, the tape position is optimized
automatically to reduce disturbance (Digital Auto Tracking).
When playing a cassette, if the end of the tape is reached,
the cassette is rewound automatically.
NTSC tapes can be played back but cannot be recorded
with this VCR.
3 To... Then press...
Stop the playback ■ (STOP).
Eject the cassette (EJECT).
Playing a Cassette Checking a Preset Recording
Cancelling a Preset Recording
PROG 1/JAN MON 21:28
PR DAY START → STOP V/P
1 MO 1 12:00 → 12:50SP ON
-- ---- --:-- → --:---- -
-- ---- --:-- → --:---- -
-- ---- --:-- → --:---- -
-- ---- --:-- → --:---- -
-- ---- --:-- → --:---- -
" ❷ SET: ❿
DELETE: CLR/RST MENU
PROG 1/JAN MON 21:28
PR DAY START → STOP V/P
1 MO 1 12:00 → 12:50SP ON
-- ---- --:-- → --:---- -
-- ---- --:-- → --:---- -
-- ---- --:-- → --:---- -
-- ---- --:-- → --:---- -
-- ---- --:-- → --:---- -
" ❷ SET: ❿
DELETE: CLR/RST MENU
CLR/RST F.ADV INDEX
A.TRK IPC INPUT
REPEAT
AUDIO DISPLAY
3
Adjusting Picture Alignment Automatically
The Picture Alignment feature enables you to optimize the tape
position automatically to obtain the best possible picture.
When noise bars or streaks appear during playback, adjust picture
alignment by pressing the A.TRK button.
Result: ◆ The tracking bar appears.
◆ The picture is automatically adjusted.
◆ The tracking bar disappears when digital auto tracking has
been completed.
A.TRK IPC INPUT
REPEAT
TRK PROG
AUDIO DISPLAY
A.TRK IPC INPUT
REPEAT
TRK PROG
AUDIO DISPLAY
OK
REC MENU
3
2
You can check your preset recordings:
◆ When you have finished presetting the VCR
◆ If you have forgotten which programmes will be
recorded
1 - Insert the cassette. Press the TIMER button.
Press the " or ❷ buttons to select the STANDARD option and
then press the ❿! button or,
◆ Press MENU on the remote control.
Result: The programming menu is displayed.
◆ Press the OK button to select TIMER PROGRAMMING option.
Result: The TIMER PROGRAMMING menu is displayed.
2 Press the " or ❷ buttons to select the required programme.
3 Press the ➛ or ❿ buttons to select and change any values as
required. For more details, refer to the previous page.
4 On completion, press MENU twice.
You can cancel any programmes that are:
◆ Incorrect
◆ No longer required
1 - Insert the cassette. Press the TIMER button.
Press the " or ❷ buttons to select the STANDARD option and
then press the ❿! button or,
◆ Press MENU on the remote control.
Result: The programming menu is displayed.
◆ Press the OK button to select TIMER PROGRAMMING option.
Result: The TIMER PROGRAMMING menu is displayed.
2 Select the programme to be cancelled by pressing the " or ❷
buttons.
3 Press the CLR/RST button to cancel the selected programme.
Result:
All the recording information is deleted and the broad-
cast will not be recorded.
4 On completion, press MENU twice.