Socket Mobile Bluetooth Connection Kit - Manual (Page 19)

CHAPTER 2: BASIC SETUP | 19
6. If needed, tap on TCP/IP to enter any special network settings for your
office network or ISP. Tap OK. In the next screen, tap Next>. Enter the
dial-up number for your office network or ISP. Tap Finish.
7. Now you are ready to start the connection.
Go to Start | Programs | Communication | Remote Networking. Tap on
your new Bluetooth connection. Enter the correct User Name and
Password. Tap Connect.
8. FOR MOTOROLA TIMEPORT 270C AND NOKIA 6310 ONLY:
After you tap Connect for the first time, the phone will display a message
asking if you want to bond. On Motorola, enter GRANT; on Nokia, enter
ACCEPT. Make up a 4-16 digit passkey, enter it on the phone, then enter
it on the handheld PC. After successfully bonding, you can set up the
phone for automatic connections.
Automatic Connections for Motorola Timeport 270C:
• On the phone, press MENU.
• Scroll to Settings, then press SELECT.
• Scroll to Connection, then press ON.
• On Bluetooth Link, press SELECT.
• Scroll to Devices, then press SELECT.
• Choose your mobile computer, then press EDIT.
• Scroll to Access:Ask, then press CHANGE.
• Scroll to Automatic, then press SELECT. Press DONE.
Automatic Connections for Nokia 6310:
• On the phone, press MENU.
• Scroll to 10 Bluetooth, then press SELECT.
• Scroll to 4 View Paired Devices, then press SELECT.
• Highlight the Pocket PC, then press OPTIONS.
• Scroll to 3 Request Connection Authorization, then press NO.
9. To use a different Bluetooth phone for dial-up networking, you can use
the same connection setup, but you must make the new phone your
favorite. Just run the Get Connected! Wizard again, select the new phone,
and make it your new Favorite when prompted. Or you can use the
Bluetooth Devices folder to change your favorite phone (see page 37).